Glasrod HIR - SOLIAO

About
Glasrod HIR is a solid rod and bar fiberglass-reinforced thermoset polyester shape that exhibits properties desirable for a wide range of structural and electrical applications. Highest physical properties. Electrical properties and high temperature capabilities Class H (200°C). Dimensional stability and 100,000 psi flexural strength. Resistant to fluids commonly used around electrical equipment. Greater cost efficiency than epoxy, phenolic, nylon or brass rod. Available in Round Rod.&&

About

Glasrod HIR is a solid rod and bar fiberglass-reinforced thermoset polyester shape that exhibits properties desirable for a wide range of structural and electrical applications. Highest physical properties. Electrical properties and high temperature capabilities Class H (200°C). Dimensional stability and 100,000 psi flexural strength. Resistant to fluids commonly used around electrical equipment. Greater cost efficiency than epoxy, phenolic, nylon or brass rod. Available in Round Rod.&&

Product Description
Generic	热固性聚酯
Material Status	Commercial: Active
Features	Good Rigidity,Good Dimensional Stability,Low or no water absorption,High Heat Resistance,Solvent resistance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.90	g/cm³	ASTM D792
Water absorption rate
24hr	0.10	%	ASTM D570

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2.07E+6	MPa	ASTM D638
tensile strength
yield	621	MPa	ASTM D638
Bending modulus	27600	MPa	ASTM D790
bending strength
yield	689	MPa	ASTM D790
shear strength	24.1	MPa	ASTM D732

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	3200	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Linear coefficient of thermal expansion
MD	6.0E-6	1/℃	ASTM D696
Thermal conductivity coefficient	0.29	W/m/K	ASTM C177

Electrical performance	Nominal value	Unit	Test method
Dielectric strength
25.4 mm in oil	3.1	kV/mm	ASTM D149
Dielectric constant
60 Hz	5.00		ASTM D150
Arc resistance	150	sec	ASTM D495

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.