| About |
|---|
| The APW compounds have been designed for profile extrusions in window lineals, fencing and other outdoor weatherable markets. They exhibit excellent whiteness, surface and processing properties in a wide range of applications.&& |
| Product Description | |
|---|---|
| Supplier | fpc-tw |
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Excellent Processability,Good surface appearance |
| Availabilitys | North America,Europe |
| Process Methods | Profile extrusion |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Tensile modulus | 2760 | MPa | ASTM D638 |
| tensile strength | |||
| yield | 42.4 | MPa | ASTM D638 |
| Bending modulus | 2410 | MPa | ASTM D790 |
| bending strength | |||
| yield | 68.9 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃，3.2mm | 1100 | J/m | ASTM D256-A |
| Falling impact resistance | |||
| 0℃ | 89.0 | J/cm | |
| 23℃ | 97.9 | J/cm |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 73.0 | ℃ | ASTM D648 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. C-125 Impactor |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |