| About |
|---|
| EM80010 is semi-crystalline biodegradable, aliphatic bio-polyester designed for use in foam applications. EM80010 is certificated to meet EU direct food contact, EN13432 and OK Home compost standards for biodegradable plastics. Typical applications: Replace hard PVC, PS foam&& |
| Product Description | |
|---|---|
| Supplier | Ecomann |
| Generic | PHA |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,Good surface appearance,High impact resistance,Hydrolysis stability,Good Printability,Biodegradable,Food contact compliance,High Heat Resistance,Hypocrystalline,Aliphatic series,Poor moisture permeability,Good coloring |
| Availabilitys | Asia Pacific |
| Process Methods | Foam treatment |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.24 | g/cm³ | ASTM D792 |
| Apparent density | 0.70 | g/cm³ | ASTM D1895 |
| Melt Flow Rate | |||
| 170℃，2.16kg | 3.0 | g/10min | ASTM D1238 |
| Water absorption rate | |||
| balance | < 1.0 | % | ASTM D570 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 600 | MPa | ASTM D638 |
| tensile strength | ASTM D638 | ||
| — | 20.0 | MPa | ASTM D638 |
| — | 15.0 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| fracture | 15 | % | ASTM D638 |
| fracture | 5.0 | % | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 90.0 | ℃ | ASTM D1525 4 |
| Melting temperature | 140 to 160 | ℃ | DSC |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Yellowness index | 50 | YI | ASTM D1925 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Foam |
| 3. Granule |
| 4. Rate B (120°C/h), Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |