EPIMAX® ABS-806HG

About
EPIMAX® ABS-806HG is an Acrylonitrile Butadiene Styrene (ABS) material. It is available in North America. Important attributes of EPIMAX® ABS-806HG are: Flame Rated High Gloss&&

Product Description
Generic	ABS
Material Status	Commercial: Active
Features	Good surface appearance,HB
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.05	g/cm³	ASTM D792
Melt Flow Rate
230℃，3.80kg	5.0	g/10min	ASTM D1238
Shrinkage rate
MD	0.40 to 0.60	%	ASTM D955

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	370	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	85.0	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
1.50 mm	HB		UL 94

optical performance	Nominal value	Unit	Test method
gloss
60°	95		ASTM D523

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	109		ASTM D785
Tensile modulus	2550	MPa	ASTM D638
tensile strength	42.1	MPa	ASTM D638
Bending modulus	2620	MPa	ASTM D790
bending strength	72.4	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.