Prixene® PH030E04

About
Prixene® PH030E04 is a polypropylene homopolymer resin of lows fluidity index with additives for general use. Appropriate for injection molding, raffia production and bi-oriented films, and in general extrusion. It has excellent processability with good stability of melt, good balance in rigidity / impact, and low transfer of odor and flavour. The application that has this material is in monofilament for strings, mooring cables, fishing nets, bristles for brushes and brooms, industrial bags, flexible containers (big bags), curtains and covers for breeding poultry and agriculture. The features presented are high rigidity and low transfer of odor and flavour. The product form is in pellets. PP Homopolymer for raffia applications. The material complies with FDA regulation title 21.CFR177.1520 (. C) 2.1.&&

About

Prixene® PH030E04 is a polypropylene homopolymer resin of lows fluidity index with additives for general use. Appropriate for injection molding, raffia production and bi-oriented films, and in general extrusion. It has excellent processability with good stability of melt, good balance in rigidity / impact, and low transfer of odor and flavour. The application that has this material is in monofilament for strings, mooring cables, fishing nets, bristles for brushes and brooms, industrial bags, flexible containers (big bags), curtains and covers for breeding poultry and agriculture. The features presented are high rigidity and low transfer of odor and flavour. The product form is in pellets. PP Homopolymer for raffia applications. The material complies with FDA regulation title 21.CFR177.1520 (. C) 2.1.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Low odor,Homopolymer
Availabilitys	Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.905	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	3.0	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	37	J/m	ASTM D256

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	105		ASTM D785
tensile strength
yield	37.2	MPa	ASTM D638
Tensile strain
fracture	10	%	ASTM D638
Bending modulus	1650	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.