Prime ABS Weather-X 100

About
Prime ABS Weather-X 100 is an ABS substrate with an Acrylic co-extruded cap. If requested a thin layer of Acrylic can be extruded on the back side for rigidizing. It offers good weatherability, chemical resistance, and high gloss with good DOI. Applications: This product is ideal for outdoor applications such as marine, ATV, RV, Tub & Shower Surrounds or anything where the above characteristics are required. Processing: Forming conditions for this product are: Surface Temperature =300-390° F Mold Temperature = 110-185° F Plug Temperature = 220-300° F De-mold = 200° F Mold Shrink = .005 – .008 in/in Primary side of sheet should not be heated as much as the secondary side. Finishing: Parts from this product may be joined with machine screws, bolts, nuts, and washers, rivets and spring steel fasteners. Thread cutting or thread-forming screws are an economical means of securing separate parts. Press and snap techniques, sonic welding and chemical bonding may also be used. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: There are many colors available, however, please check with your Primex representative for specific colors. Typically this product is smooth, however, there are several patterns available, such as haircell, calfgrain & levant.&&

About

Prime ABS Weather-X 100 is an ABS substrate with an Acrylic co-extruded cap. If requested a thin layer of Acrylic can be extruded on the back side for rigidizing. It offers good weatherability, chemical resistance, and high gloss with good DOI. Applications: This product is ideal for outdoor applications such as marine, ATV, RV, Tub & Shower Surrounds or anything where the above characteristics are required. Processing: Forming conditions for this product are: Surface Temperature =300-390° F Mold Temperature = 110-185° F Plug Temperature = 220-300° F De-mold = 200° F Mold Shrink = .005 – .008 in/in Primary side of sheet should not be heated as much as the secondary side. Finishing: Parts from this product may be joined with machine screws, bolts, nuts, and washers, rivets and spring steel fasteners. Thread cutting or thread-forming screws are an economical means of securing separate parts. Press and snap techniques, sonic welding and chemical bonding may also be used. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: There are many colors available, however, please check with your Primex representative for specific colors. Typically this product is smooth, however, there are several patterns available, such as haircell, calfgrain & levant.&&

Product Description
Generic	ABS+PMMA
Material Status	Commercial: Active
Features	Weather resistance is good,Excellent Processability,Good surface appearance,High impact resistance,High Heat Resistance,Good Tensile Strength,Solvent resistance,Good coloring
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.05	g/cm³	ASTM D792
Melt Flow Rate
230℃，10.0kg	6.5	g/10min	ASTM D1238
Shrinkage rate
MD	0.30 to 0.50	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength
fracture	41.0	MPa	ASTM D638
Tensile strain
fracture	29	%	ASTM D638
Bending modulus	2000	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
22℃，3.2mm	300	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature			ASTM D648
0.45 MPa, unannealed, 3.2 mm	94.4	℃	ASTM D648
1.8 MPa, unannealed, 3.2 mm	85.0	℃	ASTM D648

Supplementary information	Nominal value	Unit
De（mold Temperature）	93	℃
Mold temperature
other	43 to 85	℃
Plug Temperature	104 to 149	℃
Surface Temperature	149 to 199	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.