BMC 100 - SOLIAO

About
BMC 100 is a Thermoset Polyester product. It can be processed by injection molding and is available in North America. Typical application: Electrical/Electronic Applications. Primary characteristic: flame rated.&&

Product Description
Generic	热固性聚酯
Material Status	Commercial: Active
Features	HB
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.94	g/cm³	ASTM D792
Shrinkage rate
MD	0.10 to 0.40	%	ASTM D955
Water absorption rate
24hr	0.070	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	160	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	260	℃	ASTM D648

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	2.8E+16	ohms·cm	ASTM D257
Dielectric strength	17	kV/mm	ASTM D149
Arc resistance
1.59 mm	180	sec	ASTM D495
Compared to the leakage tracing index
1.59 mm	500	V	UL 746

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.60 mm	HB		UL 94

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	34.5	MPa	ASTM D638
Bending modulus	13100	MPa	ASTM D790
bending strength
yield	89.6	MPa	ASTM D790
compressive strength	145	MPa	ASTM D695
Babbitt hardness	40		ASTM D2583

Process Conditions
injection	Nominal value	Unit	Test method
Barrel rear temperature	32 to 43	°C
Barrel middle temperature	32 to 43	°C
Barrel front temperature	32 to 43	°C
Mold temperature	157 to 177	°C
Injection pressure	6.89	MPa
Clamping force	3.4	kN/cm²

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.