SELEKT BD 210 - SOLIAO

About
Selenis Selekt BD 210 is a copolyester that is suitable for injection moulding applications. From thin wall and intricate parts to thicker cross-sections where toughness is required. Injection moulded parts made from Selenis Selekt BD 210 are water-clear and glossy, whilst tough and durable. Thanks to Selenis Selekt BD 210 high dimensional stability, multiple parts products may be assembled with snap-fit connectors, maintaining the strength required to sustain daily wear and tear. Selenis Selekt BD 210 is the ideal solution when eye-catching graphics are required, as multiple decorative techniques may be successfully used. Selenis Selekt BD 210 is a ready-to-use product supplied with a demoulding agent to ease your process.&&

About

Selenis Selekt BD 210 is a copolyester that is suitable for injection moulding applications. From thin wall and intricate parts to thicker cross-sections where toughness is required. Injection moulded parts made from Selenis Selekt BD 210 are water-clear and glossy, whilst tough and durable. Thanks to Selenis Selekt BD 210 high dimensional stability, multiple parts products may be assembled with snap-fit connectors, maintaining the strength required to sustain daily wear and tear. Selenis Selekt BD 210 is the ideal solution when eye-catching graphics are required, as multiple decorative techniques may be successfully used. Selenis Selekt BD 210 is a ready-to-use product supplied with a demoulding agent to ease your process.&&

Product Description
Generic	PETG
Material Status	Commercial: Active
Features	Good Clarity,Good flexibility,Good surface appearance,Good Dimensional Stability,Renewable resources,Food contact compliance,Good tear strength,Good wear resistance,Durability
Availabilitys	North America,Latin America,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	> 1.29	g/cm³	ASTM D792
Apparent density	0.73	g/cm³
Intrinsic viscosity	0.70 to 0.74	dl/g	ISO 1628-5
Color b	< 1.00		ASTM D6290
Color L	> 64.0		ASTM D6290
Particle Shape	Cylindrical
Particle size	270 to 370	mg/20 chips
humidity	< 0.30	%

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	80.0	℃	ASTM E1356

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	65	°C
Drying time	5.0 to 6.0	hr
Recommended maximum moisture content	4.0E-3	%
Processing (melt) temperature	180 to 250	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.