KRATON® D1186 B

About
Kraton D1186 B is a clear, branched triblock copolymer based on styrene and butadiene with a polystyrene content of 30%. It is supplied from South America in the physical form identified below. Kraton D1186 BT – supplied as a porous pellet dusted with talc Kraton D1186 B polymer is used as a modifier of bitumen in roofing felt compounds, roads and pipe coating. It may also be suitable for use in formulating adhesives, sealants and coatings and in the modification of polymers.&&

Product Description
GenericSBS
Material StatusCommercial: Active
FeaturesBlock Copolymer,Inoxidizability
AvailabilitysAfrica & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICALNominal valueUnitTest method
Density0.940g/cm³ISO 2781
Apparent density0.40g/cm³ASTM D1895B
Melt Flow Rate
200℃,5.0kg< 1.0g/10minISO 1133
Solution viscosity1000 to 1400mPa·sInternal Method
Combined with styrene29.0 to 31.0%Internal Method
Antioxidant Additive>0.25%Internal Method
Total Extractables< 1.4%Internal Method
Ash Content
BT< 0.50%ISO 247
Volatiles< 0.30%Internal Method

MECHANICALNominal valueUnitTest method
Shore hardness
Shaw A, 10 seconds, molded74 ISO 868

elastic bodyNominal valueUnitTest method
tensile strength
yield24.0MPaISO 37
300% strain3.00MPaISO 37
Tensile strain
fracture800%ISO 37

Notes
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.