MAXATEL® AH500P-BK

About
MAXATEL® AH500P-BK is an Acetal (POM) Homopolymer material. It is available in North America for injection molding. Primary attribute of MAXATEL® AH500P-BK: Homopolymer.&&

Product Description
Generic	Paraformaldehyde
Material Status	Commercial: Active
Features	Homopolymer
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.42	g/cm³	ASTM D792
Melt Flow Rate
190℃，1.05kg	5.0 to 7.0	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
23℃	69.0	MPa	ASTM D638
Tensile strain
Fracture, 23 ℃	20	%	ASTM D638
Bending modulus
23℃	3210	MPa	ASTM D790
bending strength
23℃	105	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	75	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	127	℃	ASTM D648
Melting peak temperature	175	℃	ASTM D3418

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	79	°C
Drying time	2.0	hr
Processing (melt) temperature	195 to 215	°C
Mold temperature	40 to 60	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.