Complet® LCF30-PPS

About
Complet® LCF30-PPS is a Polyphenylene Sulfide (PPS) product filled with 30% long carbon fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic: rohs compliant.&&

Product Description
Generic	PPS
Material Status	Commercial: Active
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.45	g/cm³	ASTM D792
Filler content	30	%

MECHANICAL	Nominal value	Unit	Test method
tensile strength
23℃	187	MPa	ASTM D638
Tensile strain
Fracture, 23 ℃	0.70	%	ASTM D638
Tensile modulus
23℃	33793	MPa	ASTM D638
bending strength
23℃	297	MPa	ASTM D790
Bending modulus
23℃	25517	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam
23℃	465	J/m	ASTM D256

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.