| About |
|---|
| Avalon 16 is a Polytetrafluoroethylene (PTFE) product filled with glass fiber. It is available in North America. Primary characteristic: lubricated.&& |
| Product Description | |
|---|---|
| Generic | PTFE |
| Material Status | Commercial: Active |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 2.26 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 62 | ASTM D2240 | |
| tensile strength | |||
| yield | 25.5 | MPa | ASTM D1457 |
| Tensile strain | |||
| yield | 250 | % | ASTM D1457 |
| compressive strength | |||
| 25% strain | 26.2 | MPa | ASTM D695 |
| shear strength | ASTM D732 | ||
| 27℃ | 20.0 | MPa | ASTM D732 |
| 38℃ | 19.3 | MPa | ASTM D732 |
| 66℃ | 17.6 | MPa | ASTM D732 |
| 93℃ | 15.9 | MPa | ASTM D732 |
| 149℃ | 14.5 | MPa | ASTM D732 |
| friction coefficient | |||
| With oneself – static | 0.10 | ||
| Wear factor | 18 | 10^-8 mm³/N·m | ASTM D3702 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 33.3 psi |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |