| About |
|---|
| JV060U is a High Density Polyethylene injection molding grade, designed to achieve high stiffness, dimensional stability, mechanical strength and high impact resistance at low temperatures. It also presents good processability. It contains antioxidants and UV stabilizer additives. Application: Caps, crates for industrial, transportation or fishing uses, buckets, stands and pallets, trash containers, bottle cases, safety helmets, cages for poultry transportation and sporting goods.&& |
| Product Description | |
|---|---|
| Supplier | Braskem |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Weather resistance is good,Excellent Processability,Good Dimensional Stability,Food contact compliance,Inoxidizability,Weight distribution,Copolymer,High density,Butylene copolymer,low-temperature impact resistance |
| Availabilitys | Latin America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.957 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 7.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D, molded | 65 | ASTM D2240 | |
| tensile strength | |||
| Yield, molding | 28.0 | MPa | ASTM D638 |
| Bending modulus | |||
| 1% cut, molded | 1350 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| Compression Molding | 40 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed, molded | 70.0 | ℃ | ASTM D648 |
| Vicat Softening Temp | 126 | ℃ | ASTM D1525 2 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |