About |
---|
Purell GB7250 is an HDPE material which exhibits good flowability and high rigidity behaviours. Exceptional organoleptic properties and a good balance of stiffness, toughness and processability make Purell GB7250 the choice of customers for the production of closures for still mineral water and many other types of food and non-food caps and closures as well as tube shoulders. Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical (P & AD) and Business contacts first.&& |
Product Description | |
---|---|
Supplier | LyondellBasell |
Generic | HDPE |
Material Status | Commercial: Active |
Features | Good Rigidity,Low warping,Good liquidity,Good sensory characteristics.,High density,Ethylene oxide disinfection |
Availabilitys | North America,Europe |
Process Methods | Injection Molding |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 0.952 | g/cm³ | ISO 1183 |
Melt Flow Rate | ISO 1133 | ||
190℃,2.16kg | 10 | g/10min | ISO 1133 |
190℃,5.0kg | 28 | g/10min | ISO 1133 |
ESCR(Environmental Stress Cracking Resistance) | |||
50 ℃,2% Arkopal | 2.50 | hr | Internal Method |
IMPACT | Nominal value | Unit | Test method |
---|---|---|---|
Charpy Notched Impact Strength | ISO 179/1eA | ||
-30℃ | 2.0 | kJ/m² | ISO 179/1eA |
23℃ | 2.5 | kJ/m² | ISO 179/1eA |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Vicat Softening Temp | |||
B50 | 64.0 | ℃ | ISO 306 |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Shore hardness | |||
Shaw’s D | 61 | ISO 868 | |
Tensile modulus | 1000 | MPa | ISO 527-2 |
tensile strength | |||
yield | 24.0 | MPa | ISO 527-2 |
Tensile strain | |||
yield | 10 | % | ISO 527-2 |
Ball hardness | |||
H 132/30 | 46.0 | MPa | ISO 2039-1 |
Process Conditions | |||
---|---|---|---|
injection | Nominal value | Unit | Test method |
Processing (melt) temperature | 190 to 230 | °C |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
2. 6.0 MPa, 2% Arkopal N100 |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |