| About |
|---|
| EGP-200 Series is an environmental friendly biodegradable sheet that can be pressed, has excellent tensile strength, thus it can replace existing universal pressing materials EGP-220 : Laminating Tube (Blow containers, etc.)&& |
| Product Description | |
|---|---|
| Generic | PLA |
| Material Status | Commercial: Active |
| Features | Biodegradable,Good Tensile Strength |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.33 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 22.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 480 | % | ASTM D638 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 104.0 | kN/m | ASTM D1004 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |