Lustran® 752 - SOLIAO

About
Lustran® 752 resin is a high-gloss, high-impact extrusion grade of ABS (Acrylonitrile Butadiene Styrene) with improved depth of image and gloss in extruded sheet and thermoformed parts. It provides a superior balance between rigidity and impact strength, as well as excellent melt strength for good thermoformability. FEATURES High gloss High impact strength Improved depth of image Easy to color with ABS color concentrates UL 94 HB rated APPLICATIONS Carrying cases Table tops Profile extrusions Wall panels&&

About

Lustran® 752 resin is a high-gloss, high-impact extrusion grade of ABS (Acrylonitrile Butadiene Styrene) with improved depth of image and gloss in extruded sheet and thermoformed parts. It provides a superior balance between rigidity and impact strength, as well as excellent melt strength for good thermoformability. FEATURES High gloss High impact strength Improved depth of image Easy to color with ABS color concentrates UL 94 HB rated APPLICATIONS Carrying cases Table tops Profile extrusions Wall panels&&

Product Description
Supplier	INEOS
Generic	ABS
Material Status	Commercial: Active
Features	Good surface appearance,High impact resistance,Good melt strength,Good coloring
Availabilitys	North America,Latin America
Process Methods	Thermo forming

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.05	g/cm³	ASTM D792

optical performance	Nominal value	Unit	Test method
gloss	90		ASTM D2457

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	98.9	℃	ASTM D648
Linear coefficient of thermal expansion
MD	9.36E-5	1/℃	ASTM D696

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
1.52mm	HB		UL-94

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	336	J/m	ASTM D256
Impact strength of cantilever beam notch	208	J/m	ASTM D256

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness	102	R 级	ASTM D785
tensile strength
23℃	35.1	MPa	ASTM D638
Tensile strain
fracture
bending strength
23℃	55.1	MPa	ASTM D790
Bending modulus
23℃	1861.6	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.