| About |
|---|
| Alathon 9305TC is a high molecular weight high density copolymer with a broad bimodal molecular weight distribution. This resin exhibits high density, stiffness and good processability. Typical applications for wire and cable include cable in conduit. Alathon 9305TC meets the requirements of the following: ASTM D 1248, Type III, Category 5, Class A, Grade E10; Federal LP390C, Type II, Class H, Category 5, Grade 5.&& |
| Product Description | |
|---|---|
| Supplier | LyondellBasell |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Food contact compliance,High molecular weight,Bimodal molecular weight distribution |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.949 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.075 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 10% non-ionic detergent, F50 | > 200 | hr | ASTM D1693 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 65 | ASTM D2240 | |
| tensile strength | |||
| fracture | 36.6 | MPa | ASTM D638 |
| yield | 23.4 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 800 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 1000 | MPa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -76.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 125 | ℃ | ASTM D1525 |
| Thermal Crack Resistance（F50） | > 3.4 | month | ASTM D2951 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 2.6E+17 | ohms·cm | ASTM D257 |
| Dielectric constant | |||
| 1 MHz | 2.33 | ASTM D1531 | |
| Dissipation factor | |||
| 1 MHz | 7.0E-5 | ASTM D1531 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 300 to 325 | °C | |
| Barrel 2 zone temperature | 350 to 400 | °C | |
| Barrel 3 zone temperature | 400 to 450 | °C | |
| Barrel 4 zone temperature | 475 to 500 | °C | |
| Barrel 5 zone temperature | 475 to 500 | °C | |
| Connector temperature | 475 to 500 | °C | |
| Melt temperature | 475 to 500 | °C | |
| Nozzle temperature | 475 to 500 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 23°C |
| 3. F50 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |