ICORENE® 9050

About
ICORENE™ 9050 is a linear medium density polyethylene resin that is suitable for the rotational moulding of large tanks and for applications where rigidity and toughness is required. ICORENE™ 9050 contains a fully formulated stabilisation package passing the minimum UV8 requirement of AS/NZS4766:2006. The ICORENE™ 9050 range of more commonly used Tank Colours is registered as complying with AS/NZS:4766 ‘Polyethylene Storage Tanks for Water & Chemicals’. This includes Australian food contact requirements (AS2070:1,8) and potable (drinking) water standard AS4020. Details of our registration for compliance with various standards can be obtained by contacting your account manager. ICORENE™ 9050 can be formulated in custom colours and as a UV20 Ultra UV version on request.&&

About

ICORENE™ 9050 is a linear medium density polyethylene resin that is suitable for the rotational moulding of large tanks and for applications where rigidity and toughness is required. ICORENE™ 9050 contains a fully formulated stabilisation package passing the minimum UV8 requirement of AS/NZS4766:2006. The ICORENE™ 9050 range of more commonly used Tank Colours is registered as complying with AS/NZS:4766 ‘Polyethylene Storage Tanks for Water & Chemicals’. This includes Australian food contact requirements (AS2070:1,8) and potable (drinking) water standard AS4020. Details of our registration for compliance with various standards can be obtained by contacting your account manager. ICORENE™ 9050 can be formulated in custom colours and as a UV20 Ultra UV version on request.&&

Product Description
Generic	LMDPE
Material Status	Commercial: Active
Features	Weather resistance is good,Good flexibility,High impact resistance,Good liquidity,Good tear strength,Solvent resistance
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.938	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	3.2	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
100% non-ionic detergent, F50	> 500	hr	ASTM D1693A

IMPACT	Nominal value	Unit	Test method
Izod notched impact strength
-40℃，3.2mm	65.0	J	ARM

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	120	℃	ASTM D1525

Supplementary information	Nominal value	Unit	Test method
UV Rating	> 8000	hr	ASTM 2565

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	65		ASTM D2240
Tensile modulus
3.20 mm, molded	625	MPa	ASTM D638
tensile strength
Yield, 3.20 mm, molded	18.0	MPa	ASTM D638
Tensile strain
Fracture, 3.20 mm, injection molded	950	%	ASTM D638
Bending modulus
3.20 mm, molded	775	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.