| EVERCAP™ DMDA-1260 NT 7 High Density Polyethylene Resin (HDPE) enables the right performance properties to meet demanding closure and fitment application needs. It is intended for use in compression and injection molded one piece beverage closures designed primarily for applications that undergo hot fill or aseptic sterilization processes. EVERCAP™ DMDA-1260 offers improved performance for injection molded fitments designed for fitted pouches where its balance of properties are desired. EVERCAP™ DMDA-1260 delivers a combination of improved properties such as improved stiffness, higher heat deflection temperature, improved ESCR, gaseous barrier, and easy processing versus alternative HDPE systems typically used for hot fill and aseptic sterilization processes. The end result is the ability to light weight closures that are s are longer term closure performance, easy opening closures without the use of slip agent and consistent processing. for aseptic applications where an acid wash can remove the slip agent and potentially plug wash water filters. Targeted Applications and Product Main Characteristics: Compression and Injection Molded Light Weight Aseptic or Hot Fill Beverage Closures Controlled Removal Torques without Slip for Aseptic Applications Excellent Stiffness, ESCR, Gaseous Barrier and Impact Strength Excellent Sensory Properties Excellent Processing Characteristics High Heat Deflection Temperature Controlled Sensory Properties Complies with: U.S. FDA 21 CFR 177.1520(c)3.2a Europe Commission Regulation (EU) No 10/2011 Consult the regulations for complete details. |
