TATREN® IM 22 63

About
TATREN IM 22 63 is controlled rheology impact copolymer of good processing stability and medium fluidity. This grade contains nucleating and mould release agent. TATREN IM 22 63 is characterised by high stiffness and good impact resistance. Applications TATREN IM 22 63 is intended especially for injection moulding of products where good impact resistance is required – different technical items, consumer goods, household articles, rigid packages etc. Typical end products are buckets for paints and coatings, storage and transport containers, crates, garden furniture, flower pots, toys etc. TATREN IM 22 63 is suitable for food contact. The product complies with Food Contact Regulations.&&

About

TATREN IM 22 63 is controlled rheology impact copolymer of good processing stability and medium fluidity. This grade contains nucleating and mould release agent. TATREN IM 22 63 is characterised by high stiffness and good impact resistance. Applications TATREN IM 22 63 is intended especially for injection moulding of products where good impact resistance is required – different technical items, consumer goods, household articles, rigid packages etc. Typical end products are buckets for paints and coatings, storage and transport containers, crates, garden furniture, flower pots, toys etc. TATREN IM 22 63 is suitable for food contact. The product complies with Food Contact Regulations.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,High impact resistance,Renewable resources,Controllable rheological,Nucleation,Good stripping performance,Food contact compliance,Moderate liquidity,Impact copolymer
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	22	g/10min	ISO 1133

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	107	℃	ISO 75-2/Bf

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	9	kJ/m²	ISO 180-1A

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness	85	R 级	ISO 2039-2
tensile strength
23℃	26	MPa	ISO 527-2
Tensile strain
Fracture, 23 ℃	5	%	ISO 527-2
Tensile modulus
23℃	1650	MPa	ISO 527-2
Bending modulus
23℃	1500	MPa	ISO 178

Process Conditions
injection	Nominal value	Unit	Test method
Injection temperature
Rear barrel temperature	190	°C
Barrel front temperature	250	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.