| About |
|---|
| White Nitrile Butadiene Rubber (NBR), 55-65 °IRHD. Copolymer of acrylonitrile and butadiene. Formulated using only those ingredients determined by the United States Food and Drug Administration (FDA) to be in accordance with Code of Federal Regulations Title 21 (CFR21), Section 177.2600. Material formulated for repeated use in equipment associated with the production of foodstuffs intended for human consumption.&& |
| Product Description | |
|---|---|
| Generic | NBR |
| Material Status | Commercial: Active |
| Features | Food contact compliance,Copolymer |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| IRHD hardness | 57 | ASTM D1415 , ISO 48 | |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 13.0 | MPa | ASTM D412 , ISO 37 |
| Tensile strain | |||
| fracture | 350 | % | ASTM D412，ISO 37 |
| Compression deformation | |||
| 100℃，24 hr | 45 | % | ASTM D395B |
| 100℃，24 hr | 45 | % | ISO 815 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| The rate of change in tensile strength in air | |||
| 100℃，70 hr | -10 | % | ASTM D412 , ISO 37 |
| The rate of change in ultimate elongation in air | |||
| 100℃，70 hr | -25 | % | ASTM D412 , ISO 37 |
| The change rate of IRHD hardness in the air | |||
| 100℃，70 hr | 10 | ASTM D573 , ISO 188 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Maximum operating temperature | 120 | ℃ |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Low temperature resistance | |||
| Nonbrittle after 3 mins | -40 | ℃ |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type B |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |