Westlake Ardel®

About
Stock shapes extruded from Ardel® resin are specifically formulated to endure the damaging effects of UV light. When exposed to UV light, this unique material undergoes a molecular rearrangement resulting in the formation of a protective layer that essentially serves as a UV stabilizer. This inherent UV stability combined with superior retention of optical and mechanical properties make polyarylate an ideal choice for any application where weathering effects could pose a problem. Applications Include: Semiconductor components Solar energy components Appliance parts Snap lock connectors Advantages of Ardel: Exceptional UV stability Transparency Toughness Excellent flexural fatigue resistance&&

About

Stock shapes extruded from Ardel® resin are specifically formulated to endure the damaging effects of UV light. When exposed to UV light, this unique material undergoes a molecular rearrangement resulting in the formation of a protective layer that essentially serves as a UV stabilizer. This inherent UV stability combined with superior retention of optical and mechanical properties make polyarylate an ideal choice for any application where weathering effects could pose a problem. Applications Include: Semiconductor components Solar energy components Appliance parts Snap lock connectors Advantages of Ardel: Exceptional UV stability Transparency Toughness Excellent flexural fatigue resistance&&

Product Description
Supplier	Westlake Plastics
Generic	多芳基化合物
Material Status	Commercial: Active
Features	Weather resistance is good,Good flexibility,Optical performance,V-2
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.21	g/cm³	ASTM D792
Water absorption rate
24hr	0.26	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	220	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	175	℃	ASTM D648
Linear coefficient of thermal expansion
MD	6.1E-5	1/℃	ASTM D696

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	2.0E+16	ohms·cm	ASTM D257
Dielectric strength	39	kV/mm	ASTM D149
Dielectric constant
1 MHz	3.00		ASTM D150
Dissipation factor
1 kHz	0.015		ASTM D150

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	V-2		UL 94

optical performance	Nominal value	Unit	Test method
Transmittance
3000 µm	87.0	%	ASTM D1003

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	125		ASTM D785
tensile strength
yield	68.9	MPa	ASTM D638
Tensile strain
fracture	60	%	ASTM D638
Bending modulus	2100	MPa	ASTM D790
bending strength
yield	84.1	MPa	ASTM D790
compressive strength	84.1	MPa	ASTM D695

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.