About |
---|
Greenflex ML 40 F is an ethylene vinyl acetate copolymer (EVA) for injection moulding of flexible items. Items produced with Greenflex ML 40 F show high elasticity and flexibility. Main Application Greenflex ML 40 F is recommended for the production of flexible items.&& |
Product Description | |
---|---|
Generic | EVA |
Material Status | Commercial: Active |
Features | Good flexibility,High elastic,Food contact compliance,Copolymer |
Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
Process Methods | Injection Molding |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 0.935 | g/cm³ | ISO 1183 |
Melt Flow Rate | |||
190℃,2.16kg | 2.5 | g/10min | ISO 1133 |
Vinyl acetate content | 14.0 | wt% | Internal Method |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Shore hardness | ISO 868 | ||
Shaw A, injection molding | 92 | ISO 868 | |
Shaw’s D, injection molding | 40 | ISO 868 | |
tensile strength | |||
Yield, injection molding | 6.00 | MPa | ISO 527-2 |
Bending modulus | |||
injection molding | 60.0 | MPa | ISO 178 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Embrittlement temperature | < -80.0 | ℃ | ASTM D746 |
Vicat Softening Temp | 63.0 | ℃ | ISO 306/A |
Melting temperature | 91.0 | ℃ | Internal Method |
Process Conditions | |||
---|---|---|---|
injection | Nominal value | Unit | Test method |
Processing (melt) temperature | 140 to 200 | °C | |
Mold temperature | 10 to 30 | °C |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |