| About |
|---|
| ADVANCENE™ EM-3405-UVH Medium Density Polyethylene (MDPE) resin is a hexene copolymer with narrow molecular weight distribution and produced using advanced gas phase PE process. This resin is intended for use in rotational molding applications such as chemical tanks, storage containers and general UV stabilized rotomolding applications. Main Characteristics : Rotomolding. Narrow molecular weight distribution.&& |
| Product Description | |
|---|---|
| Generic | MDPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Weight distribution,Copolymer,Hexene copolymers |
| Availabilitys | Africa & Middle East ,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.934 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 5.0 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 50 ℃, 1.90 mm, 100% non-ionic surfactant, F50 | > 1000 | hr | ASTM D1693 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 14.0 | MPa | |
| fracture | 16.0 | MPa | |
| Tensile strain | |||
| fracture | 650 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 428 | MPa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -100 | ℃ | ASTM D746 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |