About |
---|
XP-382 silicone rubber is a translucent two-component, addition reaction, platinum catalyzed system that cures at room temperature. It has a moderate durometer, superb physical properties, excellent release, good chemical resistance and low silicone oil bleedout. Applications: XP-382 is used to make molds where visual inspection is required. The combination of physical integrity and moderate hardness make it an excellent choice for prototyping. Due to its flexibility and ease in releasing, it rerforms well with expandable foam systems, maintaining its shape and detail for multiple castings.&& |
Product Description | |
---|---|
Generic | 硅橡胶,RTV-2 |
Material Status | Commercial: Active |
Features | Good flexibility,Solvent resistance |
Availabilitys | North America |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 1.08 | g/cm³ |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Storage period | 26 | wk |
Thermosetting mixed viscosity | Nominal value | Unit | Test method |
---|
Uncured Properties | Nominal value | Unit | Test method |
---|---|---|---|
colour | |||
— | Clear/Transparent | ||
— | Translucent | ||
viscosity | 130 to 170 | Pa·s | |
storage stability | 60 to 120 | min |
Cured Properties | Nominal value | Unit | Test method |
---|---|---|---|
Shore hardness | |||
Shaw’s A | 29 to 35 | ||
tensile strength | 3.79 to 4.48 | MPa | |
Tensile strain | |||
fracture | 230 to 280 | % | |
tear strength | 14.0 to 21.0 | kN/m |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
2. Activator |
3. Base |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |