| About |
|---|
| Monprene IN-15056 is a general purpose thermoplastic elastomer, available in NAT and pre-colored, designed for the industrial market, including caster wheels. Monprene IN-15056 is a medium hardness, low density, clear grade that exhibits low compression set, good abrasion and chemical resistance, and is suitable for injection molding and extrusion.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Good Dimensional Stability,Good melt strength,Good tear strength,Good wear resistance,Solvent resistance,Good coloring |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.890 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 200℃，5.0kg | 1.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 65 | ASTM D2240 | |
| Shaw A5 sec | 63 | ASTM D2240 | |
| tensile strength | 15 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 730 | % | ASTM D412 |
| Compression deformation | 11 | % | ASTM D395B |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion molding conditions | Nominal value | Unit | Test method |
| Injection temperature | |||
| Rear barrel temperature | 180-230 | °C | |
| Central temperature of the barrel | 190-240 | °C | |
| Barrel front temperature | 195-245 | °C | |
| Mold temperature | 35-50 | °C | |
| Zone 1 temperature | 180-230 | °C | |
| Zone 3 temperature | 190-240 | °C | |
| Zone 5 temperature | 195-245 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die C, 20 in/min |
| 3. Extruded tape |
| 4. Type 1 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |