APEX® 77-W144M

About
APEX® 77-W144M是一种易弯曲的聚氯乙烯材料,。该产品在亚太地区、北美洲、拉丁美洲、欧洲或非洲和中东有供货,加工方式为:注射成型。&&

Product Description
Supplier	Teknor Apex
Generic	PVC, not specified
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.26	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	14	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore A, 15 seconds	69		ASTM D2240
tensile strength
fracture	12.6	MPa	ASTM D638
Tensile strain
fracture	430	%	ASTM D638

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.