About |
---|
Appeel®11D888 is a developmental modified ethylene vinyl acetate resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide peelable seals over a broad temperature range to containers constructed of PP, PS & PET. Appeel® 11D888 is available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene resins.&& |
Product Description | |
---|---|
Supplier | DuPont |
Generic | EVA |
Material Status | Commercial: Active |
Features | Low temperature heat sealing |
Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
Process Methods | Extrusion |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 0.94 | g/cm³ | ASTM D792 |
Melt Flow Rate | |||
190℃,2.16kg | 32.00 | g/10min | ASTM D1238 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Melting temperature | 71 | ℃ | ASTM D4591 |
Vicat Softening Temp | |||
55 | ℃ | ASTM D1525 |
Process Conditions | |||
---|---|---|---|
Extrusion molding conditions | Nominal value | Unit | Test method |
Zone 1 temperature | 140 | °C | |
Zone 3 temperature | 210 | °C | |
Zone 5 temperature | 220 | °C | |
Die temperature | 220 | °C |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |