| About |
|---|
| 40-3911 is an electrically conductive epoxy adhesive. 40-3911 is formulated without solvents and is therefore a 100% solids system. It is highly filled with silver resulting in a volume resistivity of 5 X 10^4 ohm-cm. This one component system cures quickly at elevated temperatures making it a suitable adhesive for many electronic assembly operations. It is a good choice for lid sealing and die bonding applications. Features: Electrically conductive Thermally conductive Cures quickly with heat One component – no mixing required Solvent-free&& |
| Product Description | |
|---|---|
| Generic | 环氧树脂 |
| Material Status | Commercial: Active |
| Features | Conductive,Good bond,Thermal conductivity,Fast Cure |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| Glass transition temperature | > 140 | ℃ | |
| Linear coefficient of thermal expansion | |||
| MD | 4.5E-5 | 1/℃ | |
| Thermal conductivity coefficient | 2.4 | W/m/K | |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| colour | Silver | ||
| Density | |||
| 25℃ | 4.04 | g/cm³ | |
| Curing time | |||
| 160℃ | 0.17 | hr | |
| 150℃ | 0.50 | hr | |
| 120℃ | 1.0 | hr | |
| storage stability | |||
| 25 ℃ | 130000 | min | |
| Storage period | |||
| 25℃ | 3 | month | |
| -10℃ | 6 | month | |
| -40℃ | 12 | month |
| Cured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 85 | ||
| Volume resistivity | 5.3E-4 | ohms·cm |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 100 grams |
| 3. Cured @ 160°C for 20 minutes |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |