| About |
|---|
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Good wear resistance,Solvent resistance |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.95 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 1.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 7.8 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 500 | % | ASTM D412 |
| Shore hardness | |||
| Shaw’s A | 80 | ASTM D2240 |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| Extrusion molding conditions | Nominal value | Unit | Test method |
| Injection temperature | |||
| Temperature at the rear of the screw barrel | 190-210 | °C | |
| Temperature in the middle of the screw barrel | 200-220 | °C | |
| Temperature in the middle of the screw barrel | 210-230 | °C | |
| Nozzle temperature | 215-2230 | °C | |
| Melting temperature | 210-230 | °C | |
| Mold temperature | 35-66 | ||
| Zone 1 temperature | 190-210 | °C | |
| Zone 2 temperature | 200-220 | °C | |
| Zone 3 temperature | 210-230 °C | °C | |
| Zone 5 temperature | 210-230 °C | ||
| Mold temperature | 210-230 °C | ||
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |