Jampilen HP640H

About
Jampilen HP640H is a polypropylene homopolymer specifically designed for thermoforming application and offers a very high stiffness, excellent contact clarity, high gloss and good antistatic properties. Jampilen HP640H allows stable, clean and easy processing. Besides excellent optical properties, this grade also offers excellent organoleptic properties and a good stiffness-impact balance. The high temperature resistance allows using this product for hot fill applications. Jampilen HP640H is suitable for food contact.&&

About

Jampilen HP640H is a polypropylene homopolymer specifically designed for thermoforming application and offers a very high stiffness, excellent contact clarity, high gloss and good antistatic properties. Jampilen HP640H allows stable, clean and easy processing. Besides excellent optical properties, this grade also offers excellent organoleptic properties and a good stiffness-impact balance. The high temperature resistance allows using this product for hot fill applications. Jampilen HP640H is suitable for food contact.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Low warping,Excellent Processability,Good Clarity,High purity,Good surface appearance,High impact resistance,Optical performance,Food contact compliance,High Heat Resistance,Good sensory characteristics.,Antistatic property,Homopolymer
Availabilitys	Africa & Middle East ,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	2.0	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	37	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	114	℃	ASTM D648
Vicat Softening Temp	155	℃	ASTM D1525 1
Accelerate oven aging
150℃	360	hr	ASTM D3012

optical performance	Nominal value	Unit	Test method
gloss	65		ASTM D2457
Haze	32	%	ASTM D1003

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	110		ASTM D785
tensile strength
yield	37.0	MPa	ASTM D638
Tensile strain
yield	10	%	ASTM D638
Bending modulus	1750	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.