| About |
|---|
| Product Description | |
|---|---|
| Generic | PP not specified |
| Material Status | Commercial: Negative |
| Features | Low warping,low-temperature impact resistance,Good flexibility |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt index | |||
| 230℃，2.16kg | 40 | g/10min | ASTM D1238 |
| Density | 0.9 | g/cm³ | ASTM D1505 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| elongation at break | 4 | % | ASTM D638 |
| Rockwell hardness | 98 | ASTM D785 | |
| Bending modulus | 16000 | MPa | ASTM D790 |
| tensile strength | |||
| yield | 280 | MPa | ASTM D638 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod notched impact strength | |||
| 23℃ | 8 | Kg.cm/cm | ASTM D256 |
| -20℃ | 4 | Kg.cm/cm | ASTM D256 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |