| About |
|---|
| POLYLAN 3O 41-sz is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in Europe.&& |
| Product Description | |
|---|---|
| Generic | ABS |
| Material Status | Commercial: Active |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.06 | g/cm³ | DIN 53479 |
| Melt Flow Rate | |||
| 220℃，10.0kg | 10 to 14 | g/10min | DIN 53735 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Bending modulus | 2300 | MPa | DIN 53457 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 11 to 13 | kJ/m² | ISO 179/2C |
| Impact strength of cantilever beam notch | |||
| 23℃ | 20 to 24 | kJ/m² | ISO 180-1A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 92.0 | ℃ | DIN 53460 2 |
| Hot deformation temperature | 92 | ℃ | DIN 53460 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. B (50N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |