Polygen SG8R - SOLIAO

About
40% chopped glass fiber reinforced PPS, enhanced toughness, excellent heat and chemical resistance&&

Product Description
Supplier	Polygen
Generic	PPS
Material Status	Commercial: Active
Features	Good flexibility,High Heat Resistance,Solvent resistance,V-0
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.63	g/cm³	ISO 1183
Shrinkage rate			ISO 294-4
TD	0.50	%	ISO 294-4
MD	0.30	%	ISO 294-4
Water absorption rate
Saturation, 23 ℃	0.020	%	ISO 62

MECHANICAL	Nominal value	Unit	Test method
tensile strength	155	MPa	ISO 527-2
Tensile strain
fracture	1.5	%	ISO 527-2
Bending modulus	12000	MPa	ISO 178
bending strength	220	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	15	kJ/m²	ISO 180

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	260	℃	ISO 75-2/A

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	V-0		UL 94

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	120 to 140	°C
Drying time	2.0 to 4.0	hr
Processing (melt) temperature	290 to 320	°C
Mold temperature	130 to 150	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.