G-COAT™ 600

About
Product Details: Ultra High performance thermoplastic polymers, unfilled Polyether Ketone, semi crystalline, fine powder for electrostatic coating & thermal spraying, high flow, suitable for food contact applications, color natural.&&

Product Description
GenericPEK
Material StatusCommercial: Active
FeaturesHigh liquidity,Food contact compliance,Hypocrystalline
AvailabilitysAfrica & Middle East ,North America,Europe

Technical Data
PHYSICALNominal valueUnitTest method
Density1.30g/cm³
Apparent density0.21g/cm³ASTM D1895B
Water absorption rate
balance0.060%ASTM D570
Particle size distribution
D(50)< 10.0µm
D(99)< 100.0µm

MECHANICALNominal valueUnitTest method
Taber abraser
1000 cycles, CS-10 wheel10.0mgASTM D1242

THERMALNominal valueUnitTest method
Continuous use temperature280UL 746B
Glass transition temperature152ASTM D3418
Melting temperature372ASTM D3418

FLAME CHARACTERISTICSNominal valueUnitTest method
0.80 mmV-0 UL 94

Supplementary informationNominal valueUnitTest method
Maximum Layer Thickness(per coat)125.0 to 150.0µm

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.