AGILITY™ 1001 Performance LDPE

About
AGILITY™ 1001 Performance LDPE is a high pressure LDPE resin designed specifically to run at faster output rates on blown film lines in blends with LLDPE resins while maintaining bubble stability. Main Characteristics: Faster processing LDPE resin Designed for higher output rates in blends with LLDPE resins at 10-20% loading Optimized molecular structure gives improved optics in blends with LLDPE resins Complies with: EU No 10/2011 U.S.FDA 21 CFR 177.1520 (c) 2.2 Canadian HPFB No Objection Consult the regulations for complete details&&

About

AGILITY™ 1001 Performance LDPE is a high pressure LDPE resin designed specifically to run at faster output rates on blown film lines in blends with LLDPE resins while maintaining bubble stability. Main Characteristics: Faster processing LDPE resin Designed for higher output rates in blends with LLDPE resins at 10-20% loading Optimized molecular structure gives improved optics in blends with LLDPE resins Complies with: EU No 10/2011 U.S.FDA 21 CFR 177.1520 (c) 2.2 Canadian HPFB No Objection Consult the regulations for complete details&&

Product Description
Supplier	DOW
Generic	LDPE
Material Status	Commercial: Active
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.920	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	0.65	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	25	µm
Membrane puncture strength	1.02	J
Membrane puncture force	31.1	N
Membrane puncture resistance	4.96	J/cm³	Internal Method
Membrane strength			ASTM D882
MD	26.5	J/cm³	ASTM D882
TD	53.8	J/cm³	ASTM D882
Secant modulus			ASTM D882
1% secant, MD	236	MPa	ASTM D882
2% secant, MD	216	MPa	ASTM D882
1% secant, TD	297	MPa	ASTM D882
2% secant, TD	256	MPa	ASTM D882
tensile strength			ASTM D882
MD, yield	27.6	MPa	ASTM D882
TD, yield	12.8	MPa	ASTM D882
MD, fracture	28.6	MPa	ASTM D882
TD, fracture	16.9	MPa	ASTM D882
Tensile strain			ASTM D882
MD, fracture	120	%	ASTM D882
TD, fracture	440	%	ASTM D882
Drop hammer impact	70	g	ASTM D1709-A
Elmandorf tear strength			ASTM D1922
MD	270	g	ASTM D1922
TD	95	g	ASTM D1922

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	94.0	℃	ASTM D1525
Melting temperature
DSC	109	℃	Internal Method

optical performance	Nominal value	Unit	Test method
gloss
45°	54		ASTM D2457
Haze	9.0	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.