| About |
|---|
| KetaSpire® KT-880 FW30 is a polyetheretherketone (PEEK) compound with higher flow than KetaSpire® KT-820 SL30, making it more suitable for injection molding applications. It is designed to deliver a balance of excellent mechanical properties, wear resistance and low coefficient of friction in both dry and externally lubricated applications. The resin is formulated with anti-friction/anti-wear additive system comprised of carbon fiber and polytetrafluoroethylene (PTFE). KetaSpire® PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent wear resistance, best-in-class fatigue resistance, ease of melt processing, high purity, and excellent chemical resistance to organics, acids, and bases. These properties make it well-suited for applications in transportation, electronics, chemical processing, and industrial uses including oil and gas exploration and production. The resin is black in color in its natural state.&& |
| Product Description | |
|---|---|
| Supplier | Solvay |
| Material Status | Commercial: Active |
| Features | Radiation disinfection,Fatigue resistance,Ethylene oxide disinfection,Gamma radiation,High Heat Resistance,High pressure disinfection,Flame Characteristics,Good Rigidity,Steam sterilized,E-beam disinfection,Good disinfection,Heat sterilization,Solvent resistance,Resistance to the steam,High liquidity,Good Dimensional Stability |
| Availabilitys | Asia Pacific,North America,Latin America,Europe,Africa & Middle East |
| Process Methods | Injection Molding,Profile extrusion |
| Technical Data | |||
|---|---|---|---|
| IMPACT | Nominal value | Unit | Test method |
| Impact strength of cantilever beam notch | |||
| — | 68 | J/m | ASTM D256 |
| — | 7.0 | kJ/m² | ISO 180 |
| Notched impact strength of cantilever beam | 530 | J/m | ASTM D4812 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | 147 | ℃ | ISO 11357-2 |
| Melting temperature | 343 | ℃ | ISO 11357-3 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | 99 | ASTM D785 | |
| Tensile modulus | |||
| — | 13500 | MPa | ASTM D638 |
| — | 16000 | MPa | ISO 527-2 |
| tensile strength | |||
| fracture | 180 | MPa | ISO 527-2 |
| — | 194 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 1.8 | % | ASTM D638 |
| fracture | 1.7 | % | ISO 527-2 |
| Bending modulus | |||
| — | 13500 | MPa | ASTM D790 |
| — | 13200 | MPa | ISO 178 |
| bending strength | |||
| — | 280 | MPa | ASTM D790 |
| — | 260 | MPa | ISO 178 |
| compressive strength | 138 | MPa | ASTM D695 |
| shear strength | 83.0 | MPa | ASTM D732 |
| friction coefficient | 0.28 | ASTM D3702 | |
| Wear factor | |||
| 0.22 MPa，4.1 m/sec | 46 | 10^-8 mm³/N·m | ASTM D3702 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.45 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 400℃，5.0kg | 50 | g/10min | ASTM D1238 |
| PV Limit | 300000 to 400000 | psi·fpm | |
| Apparent viscosity of melt | |||
| 400℃，1000 sec^-1 | 150 | Pa·s | ASTM D3835 |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| Injection speed | Nominal value | Unit | Test method |
| drying temperature | 150 | °C | |
| Drying time | 4.0 | hr | |
| Temperature at the rear of the barrel | 365 | °C | |
| Temperature in the middle of the barrel | 370 | °C | |
| Front temperature of material barrel | 375 | °C | |
| Nozzle temperature | 380 | °C | |
| Mold temperature | 175 to 205 | °C | |
| Screw compression ratio | 2.5:1.0 to 3.5:1.0 | ||
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. GMW 16771-Sequence B |
| 3. Dry |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |