| About |
|---|
| Delas 195 is a Polyvinyl Chloride + NBR (PVC+NBR) material. It is available in Asia Pacific for extrusion or injection molding. Primary attribute of Delas 195: Chemical Resistant. Typical application of Delas 195: Wire & Cable&& |
| Product Description | |
|---|---|
| Supplier | Lin Gen |
| Generic | PVC+NBR |
| Material Status | Commercial: Active |
| Features | Grease resistance |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.26 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD | 1.5 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 5 seconds | 95 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 16.7 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 290 | % | ASTM D412 |
| tear strength | 45.0 | kN/m | ASTM D624 |
| Compression deformation | |||
| 70℃ | 65 | % | ASTM D395 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| working temperature | -15 to 80 | ℃ | ASTM D746 |
| Tear Permanent Deformation | 78 | % | ASTM D412 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 80 | °C | |
| Drying time | 4.0 | hr | |
| Barrel rear temperature | 140 to 150 | °C | |
| Barrel middle temperature | 150 to 160 | °C | |
| Barrel front temperature | 160 to 170 | °C | |
| Nozzle temperature | 170 to 180 | °C | |
| Mold temperature | 10 to 50 | °C | |
| Back pressure | 0.0700 to 1.00 | MPa | |
| Screw speed | 100 to 200 | rpm | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |