TATREN® HM 50 46

About
TATREN HM 50 46 is controlled rheology homopolymer of high fluidity and narrow molecular weight distribution. This grade contains nucleating and antistatic agent. TATREN HM 50 46 is characterised by very good mechanical properties, good dimensional stability and excellent stiffness. It has higher crystallisation temperature which allows good de-moulding at higher temperature and shorter moulding cycles. Applications TATREN HM 50 46 is intended for thin wall injection moulding of household and garden articles like containers, storage boxes, bowls, buckets, lids, trays, caps, boxes for food packaging, media boxes, flower pots, garden furniture and other general purpose articles. This grade can be used in mixtures with TATREN impact copolymers. Usage of TATREN HM 50 46 for compounding is possible as well. TATREN HM 50 46 is suitable for food contact. The product complies with Food Contact Regulations.&&

About

TATREN HM 50 46 is controlled rheology homopolymer of high fluidity and narrow molecular weight distribution. This grade contains nucleating and antistatic agent. TATREN HM 50 46 is characterised by very good mechanical properties, good dimensional stability and excellent stiffness. It has higher crystallisation temperature which allows good de-moulding at higher temperature and shorter moulding cycles. Applications TATREN HM 50 46 is intended for thin wall injection moulding of household and garden articles like containers, storage boxes, bowls, buckets, lids, trays, caps, boxes for food packaging, media boxes, flower pots, garden furniture and other general purpose articles. This grade can be used in mixtures with TATREN impact copolymers. Usage of TATREN HM 50 46 for compounding is possible as well. TATREN HM 50 46 is suitable for food contact. The product complies with Food Contact Regulations.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Good Dimensional Stability,High liquidity,Renewable resources,Controllable rheological,Nucleation,Quick molding cycle,Food contact compliance,Weight distribution,Antistatic property,Homopolymer
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	50	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23 ℃, injection molding	3.0	kJ/m²	ISO 180-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	113	℃	ISO 75-2/B

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
injection molding	1900	MPa	ISO 527-2
tensile strength
Yield, injection molding	36.0	MPa	ISO 527-2
Tensile strain
Yield, injection molding	9.0	%	ISO 527-2
Bending modulus
injection molding	1800	MPa	ISO 178
Rockwell hardness
R-level	102		ISO 2039-2

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	190 to 250	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.