| About |
|---|
| LDPE 1022 FN 24 is a low density polyethylene produced by a high pressure process. LDPE 1022 FN 24 is suited to many applications in the field of consumer, industrial, food or hygiene packaging such as bags, lamination and coextrusion film.&& |
| Product Description | |
|---|---|
| Supplier | TOTAL |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Low density |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.923 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.3 | g/10min | ISO 1133 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 40 | µm | |
| tensile strength | |||
| MD, yield, 40 µ m, blow molded film | 12.0 | MPa | |
| TD, yield, 40 µ m, blow molded film | 11.5 | MPa | |
| MD, fracture, 40 µ m, blow molded film | 22.0 | MPa | |
| TD, fracture, 40 µ m, blow molded film | 20.0 | MPa | |
| Tensile strain | |||
| MD, fracture, 40 µ m, blow molded film | 360 | % | |
| TD, fracture, 40 µ m, blow molded film | 630 | % | |
| Drop hammer impact | |||
| 40 µ m, blow molded film | 95 | g | ISO 7765-1 |
| Elmandorf tear strength | |||
| MD: 40 µ m, blow molded film | 75 | N | |
| TD: 40 µ m, blow molded film | 62 | N |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 96.0 | ℃ | ISO 306 |
| Melting temperature | 109 | ℃ | ISO 11357-3 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | |||
| 40 µ m, blow molded film | 7.0 | % | ISO 14782 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 150 to 190 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |