| About |
|---|
| Product Description | |
|---|---|
| Generic | PP not specified |
| Material Status | Commercial: Negative |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.6kg | 28 | g/10min | ASTM D1238 |
| Flow shrinkage rate | |||
| 2.00mm | 0.8 – 1.2 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| elongation at break | 50 | % | ASTM D638 |
| tensile strength | 32 | MPa | ASTM D638 |
| Bending modulus | |||
| 23℃ | 1430 | MPa | ASTM D790 |
| bending strength | |||
| Yield, 23 ℃ | 46 | MPa | ASTM D790 |
| Rockwell hardness | 102 | ASTM D785 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45MPa, not antipyretic | 135 | ℃ | ASTM D648 |
| 1.8MPa, not antipyretic | 120 | ℃ | ASTM D648 |
| vicat softening point | 150 | ℃ | ISO 306 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |