| About |
|---|
| Processing: Calendaring, Casting, T-die Properties: Low melting point, high frequency easily cut and butt fusion welding Application: Shoe, laminated film in football, luggage, and leather etc.&& |
| Product Description | |
|---|---|
| Supplier | Bangtai |
| Generic | TPU-酯 |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific |
| Process Methods | casting |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.21 to 1.25 | g/cm³ | JIS K7311 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 93 to 97 | JIS K7311 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | JIS K7311 | ||
| 100% strain | 11.8 | MPa | JIS K7311 |
| 300% strain | 21.6 | MPa | JIS K7311 |
| tensile strength | 31.4 | MPa | JIS K7311 |
| Tensile strain | |||
| fracture | 480 | % | JIS K7311 |
| tear strength | 140 | kN/m | JIS K7311 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 100 | °C | |
| Drying time | 3.0 to 5.0 | hr | |
| Melt temperature | 180 to 210 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |