| About |
|---|
| KYNAR® 3312C is a semi-crystalline pelletized polymer of vinylidene fluoride with an additive to promote conductivity. KYNAR® 3312C is suitable for extrusion and injection molding applications that require both chemical resistance and up to 150°C heat resistance.&& |
| Product Description | |
|---|---|
| Supplier | Arkema |
| Generic | PVDF |
| Material Status | Commercial: Active |
| Features | Conductive,High Heat Resistance,Hypocrystalline,Solvent resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Shore hardness | |||
| Shaw’s D | 76 | ISO 868 | |
| tensile strength | |||
| Fracture, 23 ℃ | 27.1 | MPa | ISO 527 |
| Yield, 23 ℃ | 27.4 | MPa | ISO 527 |
| Tensile strain | |||
| Fracture, 23 ℃ | > 150 | % | ISO 527 |
| Yield, 23 ℃ | 9.9 | % | ISO 527 |
| Bending modulus | |||
| 23℃ | 1080 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 77 | kJ/m² | ISO 179/1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 84.0 | ℃ | ISO 75-2/A |
| Melting temperature | |||
| DSC | 165 | ℃ | ISO 3146 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | < 1.1E+4 | ohms·cm | IEC 60093 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Extreme oxygen index | 43 | % | ASTM D2863 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.78 | g/cm³ | ISO 1183/D |
| Melt Flow Rate | 11 | g/10min | ISO 1133 |
| Apparent viscosity of melt | 2050 | Pa·s | ASTM D3835 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |