KPOL-NYLON K-NY66/21I

About
Standard Polyamide 6.6 Characteristics General purpose, natural color PA66 resin suitable for compouding, injection molding, and extrusion applications where ease of processing, good set of mechanical properties, high tenacity and elongation, good set of thermal properties good color and physical property retention are desired. No intentional additives or ingredients used are among those in the European directive 2002/95/EC ( RoHS ), as amended. Applications KPOL® 66/21I has been used in many molding applications, high productivity, such as terminal blocks, bearings, bushings, cams, eletrical connectors and housings, eletrical cable ties/tie straps and many other hardware and general industrial parts.&&

About

Standard Polyamide 6.6 Characteristics General purpose, natural color PA66 resin suitable for compouding, injection molding, and extrusion applications where ease of processing, good set of mechanical properties, high tenacity and elongation, good set of thermal properties good color and physical property retention are desired. No intentional additives or ingredients used are among those in the European directive 2002/95/EC ( RoHS ), as amended. Applications KPOL® 66/21I has been used in many molding applications, high productivity, such as terminal blocks, bearings, bushings, cams, eletrical connectors and housings, eletrical cable ties/tie straps and many other hardware and general industrial parts.&&

Product Description
Generic	PA66
Material Status	Commercial: Active
Features	Excellent Processability,Nucleation,Good Tensile Strength
Availabilitys	North America,Latin America
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.14	g/cm³	ISO 1183
Shrinkage rate
MD	1.5	%	ISO 294-4
Water absorption rate
23℃，24hr	1.2	%	ISO 62

MECHANICAL	Nominal value	Unit	Test method
tensile strength
23℃	82	MPa	ISO 527-2
Tensile modulus
23℃	2800	MPa	ISO 527-2

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, annealed	71	℃	ISO 75-2/Af
Melting temperature	261	℃	ISO 11357-3
Vicat Softening Temp

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	5	kJ/m²	ISO 179/1eA
Impact strength of cantilever beam notch
23℃	5	kJ/m²	ISO 180-1A

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.