YUCLAIR® RG500U

About
YUCLAIR RG500U is medium density linear polyethylene resin with narrow molecular weight distribution displaying excellent processability and overall general toughness and strength. Extra high stress-crack resistance and impact strength make YUCLAIR RG500U very suitable for demanding applications requiring extreme toughness. RG500U contains UV-stabilizer and is used for applications demanding maximum protection against out-door weathering. YUCLAIR RG500U, complies with the U.S. Food & Drug Administration regulation 121.2501, entitled Olefin Polymers currently in effect.&&

About

YUCLAIR RG500U is medium density linear polyethylene resin with narrow molecular weight distribution displaying excellent processability and overall general toughness and strength. Extra high stress-crack resistance and impact strength make YUCLAIR RG500U very suitable for demanding applications requiring extreme toughness. RG500U contains UV-stabilizer and is used for applications demanding maximum protection against out-door weathering. YUCLAIR RG500U, complies with the U.S. Food & Drug Administration regulation 121.2501, entitled Olefin Polymers currently in effect.&&

Product Description
Supplier	SKC
Generic	MDPE
Material Status	Commercial: Active
Features	Good Rigidity,Weather resistance is good,Excellent Processability,High impact resistance,Ultra high toughness,Weight distribution,High ESCR
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.938	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	5.0	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)	> 1000	hr	ASTM D1693

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	55		ASTM D2240

film	Nominal value	Unit	Test method
tensile strength
MD, fracture	24.5	MPa	ASTM D882
Tensile strain
MD, fracture	700	%	ASTM D882
Bending modulus
MD	637	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	无断裂		ASTM D256

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -80.0	℃	ASTM D746
Vicat Softening Temp	117	℃	ASTM D1525
Melting peak temperature	123	℃	ASTM D2117

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.