| About |
|---|
| Geon™ Vinyl Flexible C75A0 is a Flexible Polyvinyl Chloride product. It can be processed by coextrusion, extrusion, or injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Geon™ Vinyl Flexible C75A0 include construction applications and plumbing/piping/potable water. Primary characteristic: good adhesion.&& |
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Good bond |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding,Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.37 | g/cm³ | ASTM D792 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 43.8 | kN/m | ASTM D624 |
| Compression deformation | |||
| 23℃，22 hr | 25 | % | ASTM D395 |
| Kappa’s modulus | ASTM D1043 | ||
| — | 138 | MPa | ASTM D1043 |
| -42℃ | 310 | MPa | ASTM D1043 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -40.0 | ℃ | ASTM D746 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shaw’s A | 75 | ASTM D2240 | |
| Shore A, 15 seconds | 67 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| fracture | 10.3 | MPa | ASTM D638 |
| 100% strain | 4.83 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 380 | % | ASTM D638 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion molding | Nominal value | Unit | Test method |
| injection molding | Nominal value | Unit | Test method |
| Melt Temperature | 174 to 179 | °C | |
| Melt Temperature | 188 to 199 | °C | |
| Notes |
|---|
| 1. BLACK 2999. Max. Temp. of use = 100 degrees F. |
| 2. Typical properties: these are not to be construed as specifications. |
| 3. 20 in/min |
| 4. Die C, 20 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |