BONDYRAM® 7103

About
Maleic Anhydride modified Ethylene-Alpha Olefin Copolymer High flow impact modifier for Polyamide compounds un-reinforced and glass fiber reinforced. Good retention of impact at low temperatures.&&

Product Description
Supplier	Ram-On
Generic	马来酸酐接枝共聚物
Material Status	Commercial: Active
Features	Copolymer,low-temperature impact resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.880	g/cm³	ASTM D792
Density	0.880	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	1.5	g/10min	ISO 1133
190℃，2.16kg	1.5	g/10min	ASTM D1238

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.