| About |
|---|
| Application Neopor® is used to manufacture silver-gray colored foams that have considerably better thermal insulation capacity than conventional EPS products. Product description Expandable polystyrene (EPS) containing uniformly distributed flame-retardant. Blowing agent: pentane. Neopor 5300 foam insulation is flame retarding and complies with DIN 4102-B1. Additional information pertaining to the fire behavior can be found in the technical information sheet titled “Fire -protec tion behavior of foams made of Styropor®”. Neopor® 5300 : For blocks and shapes with wall thicknesses over 8 mm&& |
| Product Description | |
|---|---|
| Supplier | BASF |
| Generic | PS (EPS) |
| Material Status | Commercial: Active |
| Features | Flame Characteristics |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | |||
| — | 0.02 | g/cm³ | |
| — | 0.02 to 0.03 | g/cm³ | |
| Particle size distribution | |||
| < 800.0 µm | < 2.0 | % | |
| 0.800 to 1.40 mm | > 95 | % | |
| > 1.40 mm | < 3.0 | % | |
| water content | < 0.50 | % | |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Aging（intermediate） | 0.4 to 2.0 | day | |
| Bead diameter | 0.900 to 1.30 | mm |
| Notes |
|---|
| 1. Pentane |
| 2. Typical properties: these are not to be construed as specifications. |
| 3. Obtainable in a single pre-foaming operation |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |