| About |
|---|
| ARCEL® 640 (6.00 pcf) is a Polystyrene + PE (PS+PE) material. It is available in North America for foam processing. Typical application of ARCEL® 640 (6.00 pcf): Foam&& |
| Product Description | |
|---|---|
| Generic | PS+PE |
| Material Status | Commercial: Active |
| Features | Foaming performance |
| Availabilitys | North America |
| Process Methods | Foam treatment |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.0961 | g/cm³ | |
| VOC Content | |||
| Pentane | 9.2 | % | |
| Plasticizer | 0.30 | % | |
| Particle size | |||
| 98% | 0.700 to 1.40 | mm | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| bending strength | |||
| 5% strain | 0.780 | MPa | ASTM C203 |
| compressive strength | ASTM D1621 | ||
| 25% strain | 0.545 | MPa | ASTM D1621 |
| 50% strain | 0.845 | MPa | ASTM D1621 |
| 75% strain | 1.91 | MPa | ASTM D1621 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 0.685 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 5.2 | % | ASTM D412 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Burning rate | 27 | mm/min | FMVSS 302 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |