AXELERON™ CS O-3364 NT CPD

About
AXELERON™ CS O-3364 NT CPD is a high molecular weight, high-density polyethylene insulation compound (“CPD”) providing excellent oxidative stability, toughness and abrasion resistance. AXELERON™ CS O-3364 NT CPD also provides excellent processing capability in high speed insulating extrusion processes. The AXELERON™ CS O-3364 NT CPD insulation compound has been optimized to yield increased insulation to conductor adhesion. The increased conductor adhesion improves processing latitude and insulation shrinkback performance for heavy wall insulation and tight pair twisting applications such as data grade LAN. AXELERON™ CS O-3364 NT CPD provides good performance across the full range of twisted pair telecommunication insulation applications. AXELERON™ CS O-3364 NT CPD readily meets Telcordia and ICEA requirements as well as most international age testing standards and specifications for both solid and foam/skin telephone cable insulation use. In the demanding grease filled cable application, AXELERON™ CS O-3364 NT CPD provides superior long term aging performance meeting the stringent Telcordia testing requirements. SPECIFICATIONS AXELERON™ CS O-3364 NT CPD meets the following material specifications: ASTM D 1248 Type III Category A-4, Grade E8 and E9 Federal LP-390 C, II-H, Grades 1 and 2, Category 4 Telephone wire insulated with AXELERON™ CS O-3364 NT CPD, using sound cable design and fabrication practices, will meet the following specifications: Telcordia GR-421-CORE, Issue 1, December 1998, “Generic Requirements for Metallic Telecommunications Cables” ICEA S-84-608, “Telecommunications Cable; Filled, Polyolefin Insulated, Copper Conductor -Technical Requirements” REA PE 39, “Filled Telephone Cable” REA PE 89, “Filled Telephone Cable with Expanded Insulation”&&

About

AXELERON™ CS O-3364 NT CPD is a high molecular weight, high-density polyethylene insulation compound (“CPD”) providing excellent oxidative stability, toughness and abrasion resistance. AXELERON™ CS O-3364 NT CPD also provides excellent processing capability in high speed insulating extrusion processes. The AXELERON™ CS O-3364 NT CPD insulation compound has been optimized to yield increased insulation to conductor adhesion. The increased conductor adhesion improves processing latitude and insulation shrinkback performance for heavy wall insulation and tight pair twisting applications such as data grade LAN. AXELERON™ CS O-3364 NT CPD provides good performance across the full range of twisted pair telecommunication insulation applications. AXELERON™ CS O-3364 NT CPD readily meets Telcordia and ICEA requirements as well as most international age testing standards and specifications for both solid and foam/skin telephone cable insulation use. In the demanding grease filled cable application, AXELERON™ CS O-3364 NT CPD provides superior long term aging performance meeting the stringent Telcordia testing requirements. SPECIFICATIONS AXELERON™ CS O-3364 NT CPD meets the following material specifications: ASTM D 1248 Type III Category A-4, Grade E8 and E9 Federal LP-390 C, II-H, Grades 1 and 2, Category 4 Telephone wire insulated with AXELERON™ CS O-3364 NT CPD, using sound cable design and fabrication practices, will meet the following specifications: Telcordia GR-421-CORE, Issue 1, December 1998, “Generic Requirements for Metallic Telecommunications Cables” ICEA S-84-608, “Telecommunications Cable; Filled, Polyolefin Insulated, Copper Conductor -Technical Requirements” REA PE 39, “Filled Telephone Cable” REA PE 89, “Filled Telephone Cable with Expanded Insulation”&&

Product Description
Supplier	DOW
Generic	HDPE
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.945	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	0.80	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength	23.4	MPa	ASTM D638
Tensile strain
yield	500	%	ASTM D638

THERMAL	Nominal value	Unit	Test method
Heat resistant stress cracking	> 96	hr	ASTM D2951
Oxygen sensing time
200℃	170	min	ASTM D4565

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	> 1.0E+15	ohms·cm	ASTM D257
Dielectric constant
1 MHz	2.32 2.32		ASTM D1531
Dissipation factor
1 MHz	6.0E-5 6.0E-5		ASTM D1531

Process Conditions
Extrusion	Nominal value	Unit	Test method
Barrel 1 zone temperature	150	°C
Barrel 3 zone temperature	190	°C
Barrel 5 zone temperature	230	°C
Nozzle temperature	230	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.